The Conner Group

/ blog / By

MSD Inc. entered into agreement with Messer Construction Company to provide Domestic Plumbing and Gas Piping work for The Connor Group Corporate Headquarters. The project is located in Dayton, Ohio. The building contains a total of 39,825 square feet of office space. The contracted value of this project was $466,000. MSD was responsible for the installation of the building’s Plumbing system which consisted of: The Installation of domestic water and sewage system, (44) Plumbing Fixtures, Triplex Potable Water Booster Pumps with VFD Control, Duplex Sewage Injection Pump System, Duplex Water Softening System, Duplex Sump Pump System, Twin 100 Gallon 199 MBH Water Heaters, and the Installation of Gas Piping to all Fuel Fired Appliances, which are only a few of the Plumbing Components installed for this building.

Some of the obstacles that we faced in order to complete this project certainly lied within the irregular shape of this building. Due to that shape we had to adjust and become innovative with our installation and also with some of the equipment and materials that we used. Instead of using standard 90 degree fittings, we had to use swing joint fittings in order to get the correct angles. We also overcame obstacles by having to readjust the pitch on our roof drains after installation. We needed to readjust due to the tension cables holding the glass wall that leaned outwards from the building. After tensioning the cables, the cables pulled down on the roof and we had to alter the pitch to compensate for the tensioning. We also experienced challenges on this project in regards to quality control on our layout of the underground portion of the work. Since this was not your standard shaped building, we had to perfect our layout to make sure our systems were properly installed. As a company we learned from the project and have invested in a Trimble Unit to assist with our layout process moving forward.

 

You can read more on The Conner Group by clicking here.

WPAFB Sensors Lab

Wright-Patt Air Force Base sought contractors to renovate and add onto the Sensors Lab. The HVAC portion of the project was over $13 million.

  • MSD served as the Design Assist Contractor in conjunction with Heapy Engineering for this project. In collaborating with General Contractor, Butt Construction, MSD provided Design Assist solutions for the following:
    • A large, anechoic chamber
    • An outdoor range
    • Multiple, Class-100 clean rooms
    • A three-story office building addition with DCID 6-9 requirements on many of the rooms

WPAFB Chilled Water System

The chilled water system at a high-security building on the Air Force Base was undersized and unable to keep up with demand. The facility could not operate without chilled water due to the amount of information servers in the building, and the general nature of the building itself. The entire upgrade project would need to be completed with minimal shut down time at the building. HVAC portion of this project was over $3 million.

  • MSD worked in collaboration with Diaz Construction to complete the system upgrades on time and on budget with minimal shutdowns or disruption to the facility operations.

LJB, Inc.

LJB, Inc. was renovating their Miamisburg, OH office and wanted to incorporate energy-saving upgrades.

  • MSD provided Design Build services in tandem with Greensleeves Energy Solutions, a specialist in geothermal systems.
  • MSD and Greensleeves installed a new geothermal HVAC system with open and closed loops. In addition, MSD design and installed the plumbing portion of the renovation.

Exciting Career Opportunities Await! Be Part of Our Growing Team!

Apply Here